FLOOR SHIFT ASSEMBLY > REMOVAL |
| 1. REMOVE TRANSFER SHIFT LEVER KNOB SUB-ASSEMBLY |
| 2. REMOVE PARKING BRAKE HOLE COVER SUB-ASSEMBLY |
![]() |
Detach the 4 claws and remove the parking brake hole cover.
| 3. REMOVE UPPER CONSOLE PANEL SUB-ASSEMBLY |
for Manual Transmission:
Detach the 12 claws and remove the upper console panel.

| *A | for 2WD | *B | for 4WD |
for Automatic Transmission:
Detach the 12 claws and remove the upper console panel.

| *A | for 2WD | *B | for 4WD |
| 4. REMOVE CONSOLE BOX ASSEMBLY |
![]() |
Remove the 4 screws and 2 bolts.
Using a clip remover, remove the 2 clips and console box.
| *1 | Screw |
| *2 | Bolt |
| *3 | Clip |
| 5. REMOVE FLOOR SHIFT ASSEMBLY |
![]() |
Disconnect the 2 connectors and clamp.
Move the shift lever to L.
Disconnect the transmission control cable.
![]() |
Remove the 4 bolts.
Remove the floor shift.