Home › TRANSMISSION ยท A750F AUTOMATIC TRANSMISSION › FLOOR SHIFT ASSEMBLY

FLOOR SHIFT ASSEMBLY > REASSEMBLY

for Preparation Click here


HINT:
A bolt without a torque specification is shown in the standard bolt chart (Click here).



1. INSTALL SHIFT LOCK CONTROL ECU SUB-ASSEMBLY


G034280E01
  1. Install the ECU with the 2 screws.



2. INSTALL SHIFT LEVER SUB-ASSEMBLY


G034279E01
  1. Install the shift lever.

  1. Install the pin. Then move the clip downward to lock the pin in place.



3. INSTALL SHIFT LOCK RELEASE BUTTON


G034278E01
  1. Install the spring and shift lock release button.

    HINT:
    Securely attach the claws.



4. INSTALL SHIFT LEVER SHAFT HOUSING ASSEMBLY


G034277E01
  1. Install the shaft housing with the shift lever guide pin and a new shift lever nut.

    HINT:
    Securely attach the nut.



5. INSTALL POSITION INDICATOR HOUSING LOWER


G034276E01

HINT:
Securely attach the claw.



6. INSTALL INDICATOR LIGHT WIRE SUB-ASSEMBLY


G034275E01
  1. Install the bulb to the position indicator housing.

  1. Install the indicator light wire.

    HINT:
    Securely attach the 3 clamps.



7. INSTALL POSITION INDICATOR SLIDE COVER


8. INSTALL POSITION INDICATOR HOUSING UPPER


G034274E01
  1. Install the position indicator housing to the shift lever shaft housing.

    HINT:
    Securely attach the claws.



9. INSTALL SHIFT LEVER KNOB SUB-ASSEMBLY


G034273E02
  1. Install the knob and twist it clockwise to lock it in place.