Home › SUSPENSION & AXLE › SUSPENSION › FRONT SHOCK ABSORBER

FRONT SHOCK ABSORBER > REMOVAL

for Preparation Click here



1. REMOVE FRONT WHEEL


2. DISCONNECT FRONT STABILIZER LINK ASSEMBLY LH


F049984E01
  1. Remove the nut and disconnect the stabilizer link from the steering knuckle.

    HINT:
    If the ball joint turns together with the nut, use a 6 mm hexagon wrench to hold the stud in place.



3. DISCONNECT FRONT STABILIZER LINK ASSEMBLY RH

HINT:
Use the same procedures described for the LH side.



4. REMOVE FRONT STABILIZER BRACKET
  1. Remove the front stabilizer bracket .



5. REMOVE FRONT STABILIZER BAR
  1. Remove the front stabilizer bar .



6. REMOVE FRONT SHOCK ABSORBER WITH COIL SPRING


F049985E01
  1. Remove the nut and bolt.

    HINT:
    While fixing the nut in place, loosen and remove the bolt.



    F049986E01
  1. Remove the 3 nuts and shock absorber with coil spring.