CLUTCH PEDAL > REASSEMBLY |
| 1. INSTALL NO. 2 CLUTCH PEDAL CUSHION (w/ Clutch Switch) |
![]() |
Install the clutch pedal cushion to the clutch pedal sub-assembly.
| 2. INSTALL PEDAL SPRING HOOK (w/ Turn Over) |
![]() |
Apply MP grease to the contact surface of the hook.
Install the hook to the clutch pedal support sub-assembly.
| 3. INSTALL CLUTCH MASTER CYLINDER PUSH ROD CLEVIS BUSH |
![]() |
Apply MP grease to the inside of a new clevis bush.
Install the clevis bush to the clutch pedal sub-assembly.
| 4. INSTALL NO. 1 CLUTCH PEDAL CUSHION |
![]() |
Install the clutch pedal cushion to the clutch pedal sub-assembly.
| 5. INSTALL COLLAR |
![]() |
Apply MP grease to the collar and the inside and outside of 2 new clutch pedal bushes.
Install the 2 bushes and collar to the clutch pedal sub-assembly.
| 6. INSTALL CLUTCH PEDAL TURN OVER BUSH (w/ Turn Over) |
![]() |
Apply MP grease to the inside of the clutch pedal turn over bush.
Install the bush to the clutch pedal sub-assembly.
| 7. INSTALL CLUTCH PEDAL SPRING HOLDER (w/ Turn Over) |
![]() |
Apply MP grease to the contact surface of the clutch pedal spring holder.
Install the clutch pedal spring holder to the clutch pedal support sub-assembly.
| 8. INSTALL CLUTCH PEDAL SUB-ASSEMBLY |
![]() |
Install the clutch pedal to the clutch pedal support sub-assembly with the bolt and nut.
![]() |
w/ Turn Over:
Apply MP grease to the inside of the hole in the hook and to the sliding areas of the spring, and then install the pedal spring with hook.
| 9. INSTALL CLUTCH PEDAL SPRING (w/ Turn Over) |
Move the pedal to the full stroke position.
![]() |
Install the clutch pedal spring to the clutch pedal assembly.
| 10. INSTALL CLUTCH SWITCH ASSEMBLY (w/ Clutch Switch) |
![]() |
Temporarily install the clutch switch.
Adjust the clutch switch .
Tighten the adjusting nut to the specified torque.
| 11. INSTALL CLUTCH PEDAL PAD |