Home › TRANSMISSION ยท CLUTCH › CLUTCH RELEASE CYLINDER (for 5L-E)

CLUTCH RELEASE CYLINDER (for 5L-E) > INSTALLATION

for Preparation Click here



1. INSTALL CLUTCH RELEASE CYLINDER ASSEMBLY
  1. Install the clutch release cylinder with the 2 bolts.

    Torque:
    12 N*m{ 122 kgf*cm , 9 ft.*lbf }



2. CONNECT CLUTCH RELEASE CYLINDER FLEXIBLE TUBE
  1. Using a union nut wrench, connect the flexible tube.

    Torque:
    15 N*m{ 153 kgf*cm , 11 ft.*lbf }

    NOTICE:
    Use the formula to calculate special torque value for situations where a union nut wrench is combined with a torque wrench (Click here).



3. BLEED AIR FROM CLUTCH PIPE LINE
(Click here)


4. CHECK FOR CLUTCH FLUID LEAKAGE