Home › TRANSMISSION ยท CLUTCH › CLUTCH ACCUMULATOR

CLUTCH ACCUMULATOR > INSTALLATION

for Preparation Click here



1. INSTALL CLUTCH ACCUMULATOR ASSEMBLY


D033299E04
  1. Install the clutch accumulator with the 2 nuts.

    Torque:
    18 N*m{ 184 kgf*cm , 13 ft.*lbf }

  1. Using a union nut wrench, connect the 2 flexible tubes.

    Torque:
    15 N*m{ 153 kgf*cm , 11 ft.*lbf }

    NOTICE:
    Use the formula to calculate special torque value for situations where a union nut wrench is combined with a torque wrench (Click here).



2. BLEED AIR FROM CLUTCH PIPE LINE
(Click here)


3. CHECK FOR CLUTCH FLUID LEAKAGE