Home › SUSPENSION & AXLE › SUSPENSION › FRONT UPPER SUSPENSION ARM

FRONT UPPER SUSPENSION ARM > DISASSEMBLY

for Preparation Click here



1. REMOVE FRONT UPPER ARM BUSH


F050001E01
  1. Using a hammer and chisel, strike and bend the entire flange of the bush as shown in the illustration.



    F050002E01
  1. Using SST and a press, press out the upper arm bush.

    SST
    09613-26010  
    09710-22021   (09710-01041)
    09950-00020  



2. REMOVE UPPER BALL JOINT DUST COVER
  1. Remove the dust cover set ring and dust cover from the upper arm.

    NOTICE:
    1. Do not damage the ball joint dust cover.
    2. If the ball joint dust cover is damaged, replace it.



3. REMOVE FRONT UPPER BALL JOINT


    C237895
  1. Using a snap ring expander, remove the snap ring.



    C237642E01
  1. Using SST and a press, press out the upper ball joint.

    SST
    09612-30012  
    09388-40010