FRONT UPPER SUSPENSION ARM > REASSEMBLY |
| 1. INSTALL FRONT UPPER BALL JOINT |
![]() |
Using SST and a press in a new upper ball joint.
Using a snap ring expander, install a new snap ring.
| 2. INSTALL UPPER BALL JOINT DUST COVER |
![]() |
Pack the upper arm ball joint with MP grease No. 2.
Apply MP grease No. 2 to the locations shown in the illustration.
Install a new dust cover to the upper arm.
Install a new dust cover set ring.
| 3. INSTALL FRONT UPPER ARM BUSH |
![]() |
Using SST and a press, press in a new upper arm bush.