FRONT LOWER SUSPENSION ARM > DISASSEMBLY |
| 1. REMOVE FRONT NO. 1 LOWER ARM BUSH |
![]() |
Using a hammer and chisel, strike and bend the entire flange of the bush as shown in the illustration.
![]() |
Using SST and a press, press out the bush.
| 2. REMOVE FRONT NO. 2 LOWER ARM BUSH |
![]() |
Using a hammer and chisel, strike and bend the entire flange of the bush as shown in the illustration.
![]() |
Using SST and a press, press out the bush.
| 3. REMOVE LOWER BALL JOINT ASSEMBLY |
![]() |
Using 2 screwdrivers and a hammer, remove the snap ring.
Remove the dust cover set ring and dust cover from the lower arm.
![]() |
Using SST, remove the ball joint.
| 4. REMOVE FRONT SPRING BUMPER |
Remove the front spring bumper from the vehicle.