SIDE TURN SIGNAL LIGHT ASSEMBLY > REMOVAL |
| 1. REMOVE OUTER REAR VIEW MIRROR ASSEMBLY LH |
| 2. REMOVE OUTER MIRROR LH |
Using a screwdriver, detach the 2 claws as shown in the illustration.

| *1 | Screwdriver | *2 | Protective Tape |
![]() |
Detach the 2 claws at the upper part of the outer mirror.
Remove the outer mirror LH.
| 3. REMOVE OUTER MIRROR COVER LH |
![]() |
Remove the tape.
| *1 | Tape |
![]() |
Remove the screw, detach the 5 claws and remove the rubber base.
![]() |
Using a T25 "TORX" socket wrench, remove the 3 screws.
![]() |
Using a T25 "TORX" socket wrench, remove the screw.
![]() |
Remove the 3 screws.
Detach the 6 claws.

Detach the 2 claws and remove the outer mirror cover LH as shown in the illustration.
| 4. REMOVE SIDE TURN SIGNAL LIGHT ASSEMBLY LH |
![]() |
Remove the 2 screws.
Disconnect the connector and side turn signal light assembly LH.