Home › BODY ELECTRICAL › LIGHTING › LICENSE PLATE LIGHT ASSEMBLY

LICENSE PLATE LIGHT ASSEMBLY > REMOVAL

for Preparation Click here



1. REMOVE BACK DOOR OUTSIDE GARNISH
(Click here)


2. REMOVE LICENSE PLATE LIGHT LENS


    E227474
  1. Remove the 4 screws and 2 license plate light lenses.



3. REMOVE LICENSE PLATE LIGHT LENS GASKET
  1. Remove the 2 license plate light lens gaskets.



4. REMOVE LICENSE PLATE LIGHT ASSEMBLY


    E227745
  1. Detach the 2 claws.

  1. Remove the license plate light assembly while turning it as shown in the illustration.



5. REMOVE LICENSE PLATE LIGHT BULB


    B117642
  1. Remove the 2 license plate light bulbs from the license plate light assembly.