ROOM LIGHT ASSEMBLY > REMOVAL |
| 1. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL |
| 2. REMOVE NO. 1 ROOM LIGHT ASSEMBLY |
![]() |
Using a screwdriver wrapped with protective tape, detach the 4 claws and remove the lens.
![]() |
Remove the 2 screws and room light.
Disconnect the light connector.
| 3. REMOVE NO. 1 ROOM LIGHT BULB |
Remove the bulb from the room light.
| 4. REMOVE NO. 2 ROOM LIGHT ASSEMBLY |
![]() |
Using a screwdriver wrapped with protective tape, detach the 4 claws and remove the lens.
![]() |
Remove the 2 screws and room light.
Disconnect the light connector.
| 5. REMOVE NO. 2 ROOM LIGHT BULB |
Remove the bulb from the room light.