Home › BODY ELECTRICAL › WIPER AND WASHER › WIPER SWITCH

WIPER SWITCH > INSTALLATION

for Preparation Click here


HINT:
  1. Use the same procedure for RHD and LHD vehicles.
  2. The procedure listed below is for LHD vehicles.



1. INSTALL WINDSHIELD WIPER SWITCH ASSEMBLY
  1. Attach the claw to install the windshield wiper switch.

    NOTICE:
    Do not push the claw with excessive force as damage may occur.

  1. Connect the connectors.



2. INSTALL STEERING COLUMN UPPER COVER
  1. Attach the claw to install the upper cover.



3. INSTALL STEERING COLUMN LOWER COVER


    C238860
  1. Install the lower cover with the 3 screws.



4. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL

NOTICE:
When disconnecting the cable, some systems need to be initialized after the cable is reconnected (Click here).