Home › BODY ELECTRICAL › WIPER AND WASHER › WIPER SWITCH

WIPER SWITCH > REMOVAL

for Preparation Click here


HINT:
  1. Use the same procedure for RHD and LHD vehicles.
  2. The procedure listed below is for LHD vehicles.



1. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL

NOTICE:
When disconnecting the cable, some systems need to be initialized after the cable is reconnected (Click here).



2. REMOVE STEERING COLUMN LOWER COVER


    C238860
  1. Remove the 3 screws and lower cover.



3. REMOVE STEERING COLUMN UPPER COVER
  1. Detach the claw and remove the upper cover.



4. REMOVE WINDSHIELD WIPER SWITCH ASSEMBLY


    E225945
  1. Disconnect the connectors.

  1. Detach the claw and remove the windshield wiper switch.

    NOTICE:
    Do not push the claw with excessive force as damage may occur.