Home › BODY ELECTRICAL › WIPER AND WASHER › WASHER MOTOR

WASHER MOTOR > REMOVAL

for Preparation Click here



1. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL

NOTICE:
When disconnecting the cable, some systems need to be initialized after the cable is reconnected (Click here).



2. REMOVE WASHER INLET SUB-ASSEMBLY


    B117862
  1. Remove the clip.

  1. Pull the washer inlet of the washer jar and pump upward. Then remove it from the windshield washer jar and pump.



3. REMOVE RADIATOR GRILLE


    B277882
  1. Remove the 2 clips and 2 screws.



    B277883E01
  1. Put protective tape around the radiator grille.
    Text in Illustration 
    *1
    Protective Tape

  1. Detach the 6 claws and remove the radiator grille.



4. REMOVE FOG LIGHT COVER LH (w/ Fog Light)


    B283429E01
  1. Put protective tape around the fog light cover.

  1. Using the screwdriver, detach the 8 claws and remove the fog light cover.

    HINT:
    Tape the screwdriver tip before use.

    Text in Illustration 
    *1
    Protective Tape



5. REMOVE FOG LIGHT COVER RH (w/ Fog Light)

HINT:
Use the same procedure described for the LH side.



6. REMOVE FRONT BUMPER HOLE COVER LH (w/o Fog Light)


    B283515E01
  1. Put protective tape around the front bumper hole cover.

  1. Using the screwdriver, detach the 8 claws and remove the front bumper hole cover.

    HINT:
    Tape the screwdriver tip before use.

    Text in Illustration 
    *1
    Protective Tape



7. REMOVE FRONT BUMPER HOLE COVER RH (w/o Fog Light)

HINT:
Use the same procedure described for the LH side.



8. REMOVE FRONT BUMPER COVER


    B277936
  1. Remove the 6 screws and 3 clips.



    B277938E01
  1. Put protective tape around the front bumper cover.

  1. Remove the 2 screws, 2 bolts and 5 clips.
    Text in Illustration 
    *1
    Protective Tape

  1. w/ Headlight Cleaner System:
    Disconnect the headlight cleaner hose, and then drain the washer fluid.

    HINT:
    Use a container to collect the washer fluid.

  1. w/ Fog Light:
    Disconnect the 2 fog light connectors.



    B277939
  1. Detach the 8 claws and remove the front bumper cover.



9. DRAIN WASHER FLUID
  1. Disconnect the washer hose from the windshield washer motor and pump, and drain the washer fluid.

    HINT:
    Use a container to collect the washer fluid.



10. REMOVE WINDSHIELD WASHER JAR ASSEMBLY


    E225505
  1. Remove the grommet.



    E225297
  1. Disconnect the 2 connectors and 2 washer hoses.

  1. Detach the 3 clamps and remove the 3 bolts. Then remove the washer jar and pump.



11. REMOVE WINDSHIELD WASHER MOTOR AND PUMP ASSEMBLY


    B117865
  1. Pull out the washer motor and pump from the packing of the washer jar.



12. REMOVE REAR WASHER MOTOR AND PUMP ASSEMBLY


    E225298
  1. Pull out the rear washer motor and pump from the packing of the washer jar.