METER / GAUGE SYSTEM > DATA LIST / ACTIVE TEST |
| READ DATA LIST |
Connect the intelligent tester to the DLC3.
Turn the ignition switch ON.
Read the Data List according to the display on the tester.
| Tester Display | Measurement Item/Range | Normal Condition | Diagnostic Note |
| Parking Brake SW | Parking brake switch / ON or OFF | ON: Parking brake is applied OFF: Parking brake is not applied | - |
| PERFORM ACTIVE TEST |
Connect the intelligent tester to the DLC3.
Turn the ignition switch ON.
Perform the Active Test according to the display on the tester.
| Tester Display | Test Part | Control Range |
| ABS Warning Light | ABS warning light ON / OFF | - |