Home › BODY ELECTRICAL › AUDIO / VISUAL › FRONT DOOR SPEAKER

FRONT DOOR SPEAKER > INSPECTION

for Preparation Click here



1. INSPECT FRONT NO. 1 SPEAKER ASSEMBLY


    B262434E01
  1. Measure the resistance according to the value(s) in the table below.

    Standard Resistance:
    Tester Connection
    Condition
    Specified Condition
    1 - 2
    Always
    Below 4 Ω

    If the result is not as specified, replace the front No. 1 speaker assembly.
    Text in Illustration 
    *a
    Component without harness connected
    (Front No. 1 Speaker Assembly)



2. INSPECT FRONT NO. 2 SPEAKER ASSEMBLY


    E110354E10
  1. Measure the resistance according to the value(s) in the table below.

    Standard Resistance:
    Tester Connection
    Condition
    Specified Condition
    1 - 2
    Always
    Below 1 Ω
    3 - 4
    Always
    Below 1 Ω
    1 - Body ground
    Always
    10 kΩ or higher
    3 - Body ground
    Always
    10 kΩ or higher

    If the result is not as specified, replace the front No. 2 speaker assembly.
    Text in Illustration 
    *a
    Component without harness connected
    (Front No. 2 Speaker Assembly)