EXHAUST PIPE > REMOVAL |
| 1. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL |
| 2. REMOVE HEATED OXYGEN SENSOR (for Bank 1 Sensor 2) |
![]() |
Disconnect the sensor connector.
Using SST, remove the sensor from the front exhaust pipe.
| 3. REMOVE HEATED OXYGEN SENSOR (for Bank 2 Sensor 2) |
![]() |
Disconnect the sensor connector.
Using SST, remove the sensor from the front exhaust pipe.
| 4. REMOVE TAILPIPE ASSEMBLY |
Remove the 2 bolts, gasket, exhaust pipe support and tailpipe.
| 5. REMOVE CENTER EXHAUST PIPE ASSEMBLY |
Remove the 2 bolts and 2 compression springs and gasket.
Remove the 3 exhaust pipe supports and exhaust pipe.
| 6. REMOVE FRONT NO. 2 EXHAUST PIPE ASSEMBLY |
Remove the 2 bolts, gasket, 2 nuts, pipe support and exhaust pipe.
| 7. REMOVE FRONT EXHAUST PIPE ASSEMBLY |
Remove the 2 nuts, gasket, pipe support and exhaust pipe.