FRONT SEAT INNER BELT ASSEMBLY > REMOVAL |
| 1. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL |
| 2. REMOVE FRONT SEAT ASSEMBLY (for Driver Side) |
![]() |
Lift up the seat track adjusting handle and move the seat to the rearmost position.
Remove the 2 bolts on the front side of the seat.
Lift up the seat track adjusting handle and move the seat to the foremost position.
Remove the 2 bolts on the rear side of the seat.
Lift up the seat track adjusting handle and move the seat to the center position. Also, operate the reclining adjuster release handle and move the seatback to the upright position.
w/ Seat belt warning, w/ occupant detection sensor:
Disconnect the connector under the seat.
Remove the seat.
| 3. REMOVE FRONT SEAT ASSEMBLY (for Front Passenger Side) |
![]() |
Lift up the seat track adjusting handle and move the seat to the rearmost position.
Remove the 2 bolts on the front side of the seat.
Lift up the seat track adjusting handle and move the seat to the foremost position.
Remove the 2 bolts on the rear side of the seat.
Lift up the seat track adjusting handle and move the seat to the center position. Also, operate the reclining adjuster release handle and move the seatback to the upright position.
w/ Seat belt warning, w/ occupant detection sensor:
Disconnect the connector under the seat.
Remove the seat.
| 4. REMOVE FRONT SEAT INNER BELT ASSEMBLY (for Driver Side) |
![]() |
Detach the clamp.
![]() |
Detach the wire harness from the clamp.
Remove the nut and seat belt.
Remove the front seat belt anchor plate.
Remove the buckle cover.
| 5. REMOVE FRONT SEAT INNER BELT ASSEMBLY (for Front Passenger Side) |
![]() |
w/ Passenger Seat Belt Warning Light:
Detach the 2 clamps.
Disconnect the connector.
![]() |
Detach the wire harness from the clamp.
Remove the nut and seat belt.
Remove the front seat belt anchor plate.
Remove the buckle cover.
w/o Passenger Seat Belt Warning Light:
Remove the nut and seat belt.
Remove the front seat belt anchor plate.
Remove the buckle cover.