Home › ENGINE ยท 5L-E › ENGINE MECHANICAL › DRIVE BELT

DRIVE BELT > INSTALLATION

for Preparation Click here



1. INSTALL FAN & GENERATOR V BELT (w/o Air Conditioning System)


    A142830E01
  1. Install the V belt.

  1. Using a bar, adjust the tension of the V belt.

  1. Tighten the bolts A and B.

    Torque:
    75 N*m{ 765 kgf*cm , 55 ft.*lbf } for bolt A
    18 N*m{ 185 kgf*cm , 13 ft.*lbf } for bolt B

  1. Check the deflection of the V belt .



2. INSTALL FAN & GENERATOR V BELT (w/ Air Conditioning System)


    A115632E01
  1. Install the V belt.

  1. Tightening bolt C, adjust the deflection of the V belt .

  1. Tighten the bolts A and B.

    Torque:
    75 N*m{ 765 kgf*cm , 55 ft.*lbf } for bolt A
    18 N*m{ 185 kgf*cm , 13 ft.*lbf } for bolt B

  1. Recheck the deflection of the V belt.



3. INSTALL COOLER COMPRESSOR V BELT (w/ Air Conditioning System)


    A121093E02
  1. Install the V belt.

  1. Tightening bolt B, adjust the deflection of the V belt .

  1. Tighten nut A.

    Torque:
    39 N*m{ 400 kgf*cm , 29 ft.*lbf }

  1. Recheck the deflection of the V belt.



4. INSTALL VANE PUMP V BELT


    A121092E01
  1. Install the V belt.

  1. Using a bar, adjust the deflection of the V belt .

  1. Tighten bolt A and nut B.

    Torque:
    48 N*m{ 489 kgf*cm , 35 ft.*lbf } for bolt A
    64 N*m{ 635 kgf*cm , 47 ft.*lbf } for bolt B

  1. Recheck the deflection of the V belt.