AIR CONDITIONING UNIT (for Automatic Air Conditioning System) > REASSEMBLY |
| 1. INSTALL NO. 1 COOLER THERMISTOR |
![]() |
Insert the No. 1 cooler thermistor as shown in the illustration to install it.
| 2. INSTALL COOLER EXPANSION VALVE |
Sufficiently apply compressor oil to 2 new O-rings and the fitting surface of the hose joint.
Install the 2 O-rings to the cooler evaporator.
Using a 4 mm socket hexagon wrench, install the cooler expansion valve with the 2 hexagon bolts.
| 3. INSTALL NO. 1 COOLER EVAPORATOR SUB-ASSEMBLY |
Attach the clamp to install the No. 1 cooler evaporator sub-assembly.
Attach the 3 claws to install the lower heater case.
Install the 4 screws.
| 4. INSTALL HEATER RADIATOR UNIT SUB-ASSEMBLY |
Attach the evaporator case to the blower case.
Install the heater radiator unit sub-assembly with the screw.
| 5. INSTALL BLOWER ASSEMBLY |
Install the blower assembly with the 3 screws.
| 6. INSTALL MODE DAMPER SERVO SUB-ASSEMBLY |
Install the mode damper servo sub-assembly with the 3 screws.
![]() |
Set the mode damper servo sub-assembly so that the tooth of the gear engages with the cutout part as shown in the illustration to install the lever.
| *a | Cut Part |
Attach the claw.
| 7. INSTALL AIR MIX DAMPER SERVO SUB-ASSEMBLY |
Install the air mix damper servo sub-assembly with the 3 screws.