Home › HEATER & AIR CONDITIONING SYSTEM › AIR CONDITIONING › AIR CONDITIONING PANEL (for Manual Air Conditioning System)

AIR CONDITIONING PANEL (for Manual Air Conditioning System) > REMOVAL

for Preparation Click here



1. REMOVE CENTER INSTRUMENT CLUSTER FINISH PANEL ASSEMBLY


B278367E01


  1. for Manual Air Conditioning System:

    1. Put protective tape around the center instrument cluster finish panel.
      Text in Illustration 
      *1
      Protective Tape

    2. Using a moulding remover, detach the 10 claws and 4 clips.



    3. B278366
    4. Detach the 4 claws and disconnect the air conditioner control.

    5. Disconnect the connectors and remove the center instrument cluster finish panel.



    B278368E01
  1. for Automatic Air Conditioning System:

    1. Put protective tape around the center instrument cluster finish panel.
      Text in Illustration 
      *1
      Protective Tape

    2. Using a moulding remover, detach the 8 claws and 4 clips.

    3. Disconnect the connectors and remove the center instrument cluster finish panel.



2. REMOVE COOLER SWITCH


E225767
  1. Detach the 2 claws.

  1. Disconnect the connector and remove the cooler switch.



3. REMOVE NO. 2 HEATER CONTROL KNOB


E225816
  1. Remove the No. 2 heater control knob as shown in the illustration.



4. REMOVE HEATER CONTROL KNOB


E225817
  1. Remove the heater control knob as shown in the illustration.



5. DISCONNECT AIR INLET DAMPER CONTROL CABLE SUB-ASSEMBLY


E225076
  1. Detach the 2 claws and disconnect the air inlet damper control cable sub-assembly.



6. DISCONNECT HEATER CONTROL CABLE SUB-ASSEMBLY


E225077
  1. Detach the 2 claws and disconnect the heater control cable sub-assembly.



7. DISCONNECT AIR MIX DAMPER CONTROL CABLE SUB-ASSEMBLY


E226070
  1. Detach the 2 claws and disconnect the air mix damper control cable sub-assembly.



8. REMOVE AIR CONDITIONING CONTROL ASSEMBLY
  1. Disconnect the connector and remove the air conditioning control assembly.