No. 2 ATF Temperature Sensor State
| Detection Condition
| Symptom
| Recovery Condition
|
Sensor is normal
| ATF temperature more than 150°C (302°F)
| ATF temperature warning light remains ON
| ATF temperature less than 135°C (275°F)*2
|
ATF temperature more than 130°C (266°F)
| Shift point too high
| ATF temperature less than 110°C (230°F)
|
When the conditions (a) and (b) are satisfied (a) ATF temperature more than 130°C (266°F) (b) Engine coolant temperature more than 95°C (203°F)
| Lock-up at 3rd gear*1
| ATF temperature less than 110°C (230°F)*2 and engine coolant temperature more than 95°C (203°F)
|
Sensor is short-circuited
| Any conditions
| - ATF temperature warning light remains ON
- Shift point too high
| Symptoms still occur
|
Engine coolant temperature more than 95°C (203°F)
| Lock-up at 3rd gear*1
| Symptoms still occur
|
DTC Code
| DTC Detection Condition
| Trouble Area
|
P2740
| (a) and (b) are detected momentarily within 0.5 sec. when P2742 and P2743 are not detected (1 trip detection logic): (a) No. 2 ATF temperature sensor resistance is less than 25 Ω (b) No. 2 ATF temperature sensor resistance is more than 156 kΩ
- HINT:
- Within 0.5 sec., the malfunction switches from (a) to (b) or from (b) to (a)
| - Open or short in No. 2 ATF temperature sensor circuit
- No. 2 ATF temperature sensor
- ECM
|
P2742
| No. 2 ATF temperature sensor resistance is less than 25 Ω for 0.5 sec. or more (1 trip detection logic)
| - Short in No. 2 ATF temperature sensor circuit
- No. 2 ATF temperature sensor
- ECM
|
P2743
| 15 minutes or more after the engine start, No. 2 ATF temperature sensor resistance is more than 156 kΩ for 0.5 sec. or more (1 trip detection logic)
| - Open in No. 2 ATF temperature sensor circuit
- No. 2 ATF temperature sensor
- ECM
|