Home › STEERING › POWER STEERING › VANE PUMP (for KD Series Engine)

VANE PUMP (for KD Series Engine) > REMOVAL

for Preparation Click here



1. REMOVE NO. 2 ENGINE UNDER COVER
  1. Remove the 4 bolts and under cover.



2. REMOVE NO. 1 ENGINE UNDER COVER
  1. Remove the 4 bolts and under cover.



3. REMOVE FRONT SIDE MEMBER TO FRONT SUSPENSION CROSSMEMBER BRACE
  1. Remove the 8 bolts and crossmember brace.



4. DRAIN POWER STEERING FLUID


5. DISCONNECT OIL RESERVOIR TO PUMP HOSE


    G034430E01
  1. Disengage the clip and disconnect the hose.



6. DISCONNECT PRESSURE FEED TUBE ASSEMBLY


    G034431E02
  1. Using a union nut wrench, remove the union bolt and disconnect the pressure feed tube from the vane pump.

  1. Remove the gasket from the pressure feed tube.



7. REMOVE VANE PUMP ASSEMBLY


    G034432E01
  1. Remove the 2 nuts and vane pump.

  1. Remove the O-ring.