VALVE BODY ASSEMBLY > INSTALLATION |
| 1. INSTALL TRANSMISSION VALVE BODY ASSEMBLY |
![]() |
Align the groove of the manual valve with the pin of the lever.
![]() |
Install the 20 bolts.
| 2. CONNECT TRANSMISSION WIRE |
![]() |
Connect the 4 connectors to the 4 shift solenoid valves.
| 3. INSTALL VALVE BODY OIL STRAINER ASSEMBLY |
![]() |
Install 3 new gaskets.
![]() |
Install the oil strainer with the 4 bolts.
| 4. INSTALL AUTOMATIC TRANSMISSION OIL PAN SUB-ASSEMBLY |
![]() |
Install the 3 magnets to the locations indicated in the illustration.
![]() |
Apply seal packing to the oil pan as shown in the illustration.
Install the oil pan with the 19 bolts.
| 5. INSTALL TRANSMISSION OIL FILLER TUBE SUB-ASSEMBLY |
![]() |
Coat a new O-ring with ATF, and install it to the oil filler tube.
Install the oil filler tube with the 2 bolts.
Install the oil dipstick.
| 6. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL |
| 7. PERFORM INITIALIZATION |
| 8. ADD AUTOMATIC TRANSMISSION FLUID |
| 9. INSPECT AUTOMATIC TRANSMISSION FLUID |
Inspect the automatic transmission fluid (Click here).