Home › TRANSMISSION ยท A343F AUTOMATIC TRANSMISSION › OIL PUMP

OIL PUMP > REASSEMBLY

for Preparation Click here



1. INSTALL FRONT OIL PUMP OIL SEAL


AT05154E01
  1. Using SST and a hammer, tap in a new front oil pump oil seal.

    SST
    09350-30020   (09351-32140)

    HINT:
    Make sure the front oil pump oil seal end is flush with the outer edge of the pump body.

  1. Coat the lip of the front oil pump oil seal with MP grease.



2. FIX FRONT OIL PUMP BODY
  1. Place the front oil pump body on the torque converter assembly.



3. INSTALL FRONT OIL PUMP DRIVEN GEAR


D025800E01
  1. Coat the driven gear with ATF.

  1. Install the driven gear to the front oil pump body.



4. INSTALL FRONT OIL PUMP DRIVE GEAR


D025799E01
  1. Coat the drive gear with ATF.

  1. Install the drive gear to the front oil pump body.



5. INSTALL STATOR SHAFT ASSEMBLY


AT08410E02
  1. Align the bolt holes of the stator shaft with the bolt holes of the front oil pump body and install the stator shaft assembly to the front oil pump body.

  1. Install the 13 bolts.

    Torque:
    9.8 N*m{ 100 kgf*cm , 87 in.*lbf }



6. INSTALL CLUTCH DRUM OIL SEAL RING


AT08409E01
  1. Coat 2 new clutch drum oil seal rings with ATF.

  1. Squeeze the ends of the 2 oil seal rings together with the overlap distance 8.0 mm (0.314 in.) or less, and then install them to the stator shaft groove.

    HINT:
    After installing the oil seal rings, check that they rotate smoothly.



7. INSPECT OIL PUMP DRIVE GEAR ROTATION


AT08408E01
  1. Check that the drive gear rotates smoothly.

  1. Remove the oil pump from the torque converter.



8. INSTALL FRONT OIL PUMP BODY O-RING


D025646E01
  1. Coat a new O-ring with ATF and Install it to the front oil pump body.