Home › ENGINE ยท 1KD-FTV › STARTING › IGNITION SWITCH

IGNITION SWITCH > INSTALLATION

for Preparation Click here



1. INSTALL IGNITION SWITCH ASSEMBLY


A111806
  1. Attach the 2 claws to install the switch to the steering column bracket upper.



2. CONNECT CONNECTOR


A184576E01
  1. Connect the 9 connectors as shown in the illustration.

  1. Secure the wire harness with the clamps.



3. INSTALL STEERING COLUMN COVER LOWER


A184575E01
  1. Install the cover lower with the 3 screws.

    HINT:
    Turn the steering wheel to the right and left as necessary to install the 3 screws and cover lower.



4. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL