STARTER (for DENSO Made) > INSTALLATION |
| 1. INSTALL STARTER ASSEMBLY |
![]() |
Install the starter and ground cable with the 2 nuts and bolt.
Install the starter wire to terminal 30 with the nut.
Connect the starter connector.
Attach the terminal cap.
| 2. INSTALL TRANSMISSION OIL FILLER TUBE SUB-ASSEMBLY |
Coat a new O-ring with ATF, and install it to the oil filter tube.
Install the oil filter tube with the 2 bolts.
Install the oil dipstick.
| 3. INSTALL FRONT FENDER SEAL |
Install the seal with the 5 clips.
| 4. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL |