Home › ENGINE ยท 1GR-FE › STARTING › STARTER

STARTER > REMOVAL

for Preparation Click here



1. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL

NOTICE:
When disconnecting the cable, some systems need to be initialized after the cable is reconnected.



2. REMOVE FRONT FENDER SEAL
  1. Remove the 5 clips and seal.



3. REMOVE STARTER ASSEMBLY


A112758
  1. Disconnect the starter connector.

  1. Remove the nut and disconnect the starter wire.



    A112759
  1. Remove the 2 bolts and starter.