Home › ENGINE ยท 1KD-FTV › STARTING › STARTER (for BOSCH Made)

STARTER (for BOSCH Made) > REMOVAL

for Preparation Click here



1. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL

NOTICE:
When disconnecting the cable, some systems need to be initialized after the cable is reconnected.



2. REMOVE FRONT FENDER SEAL
  1. Remove the 5 clips and seal.



3. DISCONNECT CLUTCH RELEASE CYLINDER ASSEMBLY


G034223E01
  1. Remove the 2 bolts and disconnect the release cylinder.



4. REMOVE STARTER ASSEMBLY


    A201713
  1. Disconnect the starter connector.

  1. Remove the nut and disconnect the starter wire.



    A201714E02
  1. Remove the 2 bolts and starter.