Home › ENGINE ยท 2KD-FTV › STARTING › STARTER (for 2.2 kW Type)

STARTER (for 2.2 kW Type) > REMOVAL

for Preparation Click here



1. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL

NOTICE:
When disconnecting the cable, some systems need to be initialized after the cable is reconnected (Click here).



2. REMOVE FRONT FENDER SEAL
  1. Remove the 5 clips and seal.



3. REMOVE CLUTCH RELEASE CYLINDER ASSEMBLY


C113783
  1. Remove the 2 bolts and clutch release cylinder.



4. REMOVE STARTER ASSEMBLY


    A201713
  1. Disconnect the starter connector.

  1. Remove the nut and disconnect the starter wire.



    A201714E04
  1. Remove the 2 bolts and disconnect the ground wire.
    Text in Illustration 
    *1
    Ground wire

  1. Remove the stater.