GENERATOR > REMOVAL |
| 1. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL |
| 2. REMOVE AIR CLEANER ASSEMBLY |
![]() |
Disconnect the IAT sensor connector.
Loosen the air cleaner hose clamp.
Remove the 2 bolts and air cleaner.
| 3. REMOVE COOLER COMPRESSOR V BELT (w/ Air Conditioning System) |
![]() |
Loosen nut A and bolt B, and remove the V belt.
| 4. REMOVE FAN & GENERATOR V BELT (w/ Air Conditioning System) |
![]() |
Loosen the bolts A and B.
Loosen adjusting bolt C, and remove the V belt.
| 5. REMOVE FAN & GENERATOR V BELT (w/o Air Conditioning System) |
![]() |
Loosen the bolts A and B, and remove the V belt.
| 6. REMOVE FAN BELT ADJUSTING BAR (w/o Air Conditioning System) |
![]() |
Remove the 3 bolts and fan belt adjusting bar.
| 7. DISCONNECT COOLER COMPRESSOR ASSEMBLY (w/ Air Conditioning System) |
![]() |
Disconnect the compressor connector.
Remove the 4 bolts and disconnect the cooler compressor.
| 8. REMOVE COMPRESSOR MOUNTING BRACKET (w/ Air Conditioning System) |
![]() |
Remove the bolt and spacer.
![]() |
Remove the 4 bolts and compressor mounting bracket.
| 9. REMOVE GENERATOR ASSEMBLY |
![]() |
Detach the terminal cap.
Remove the nut and generator wire.
Disconnect the generator connector.
![]() |
Remove the union bolt to disconnect the vacuum pump hose and remove the 2 gaskets.
Remove the union bolt to disconnect the vacuum pump oil inlet hose and remove the 2 gaskets.
Detach the vacuum pump oil inlet hose from the cord clip.
Disconnect the vacuum pump oil outlet hose.
![]() |
Remove the bolt and generator.