GENERATOR > REMOVAL |
| 1. PRECAUTION |
| 2. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL |
| 3. REMOVE AIR CLEANER ASSEMBLY |
Disconnect the mass air flow meter connector.
Loosen the hose clamp.
Remove the 2 bolts and air cleaner.
| 4. REMOVE FAN AND GENERATOR V BELT |
![]() |
Rotate the tensioner pulley clockwise to loosen the belt and reduce the tension. Then remove the V belt.
| *A | w/ Air Conditioning System |
| *B | w/o Air Conditioning System |
| *1 | Cooler Compressor |
| *2 | Fan Pulley |
| *3 | Generator |
| *4 | Tensioner |
| *5 | Crankshaft Pulley |
| 5. REMOVE GENERATOR ASSEMBLY |
![]() |
Remove the nut and generator wire.
Disconnect the generator connector.
Remove the 2 bolts and generator.