Home › ENGINE ยท 1KD-FTV › ENGINE CONTROL SYSTEM › CRANKSHAFT POSITION SENSOR

CRANKSHAFT POSITION SENSOR > INSTALLATION

for Preparation Click here



1. INSTALL CRANKSHAFT POSITION SENSOR
  1. Apply a light coat of engine oil to the O-ring of the sensor.

  1. Install the sensor with the bolt.

    Torque:
    8.5 N*m{ 87 kgf*cm , 75 in.*lbf }



  1. Attach the 3 clips and connect the sensor connector.


    A112048



2. INSTALL NO. 2 ENGINE UNDER COVER


3. INSTALL NO. 1 ENGINE UNDER COVER


4. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL