Home › ENGINE ยท 1KD-FTV › ENGINE CONTROL SYSTEM › DIESEL THROTTLE BODY

DIESEL THROTTLE BODY > INSTALLATION

for Preparation Click here



1. INSTALL DIESEL THROTTLE BODY ASSEMBLY


A111832
  1. Install a new gasket and the throttle body with the 2 bolts and 2 nuts.

    Torque:
    20 N*m{ 204 kgf*cm , 15 ft.*lbf }



    A111790
  1. Connect the throttle control motor connector.

  1. Connect the throttle position sensor connector.



2. INSTALL CHARGE AIR COOLER ASSEMBLY WITH INTAKE AIR CONNECTOR


    A112764E01
  1. Install the intake air connector to the air hoses.

  1. Install the CAC with the 4 bolts.

    Torque:
    32 N*m{ 326 kgf*cm , 24 ft.*lbf } for bolt labeled A
    12 N*m{ 125 kgf*cm , 9 ft.*lbf } for bolts labeled B, C and D



    A111787
  1. Tighten the 2 clamps.



    A111786
  1. Connect the vacuum hose to the manifold absolute pressure sensor.

  1. Connect the IAT sensor connector.

  1. Connect the manifold absolute diesel pressure sensor connector.



3. INSTALL NO. 1 ENGINE COVER SUB-ASSEMBLY


A111785
  1. Install the engine cover with the 3 bolts and 2 nuts.

    Torque:
    7.0 N*m{ 71 kgf*cm , 62 in.*lbf }



4. PERFORM DIESEL THROTTLE BODY INITIALIZATION
(Click here)