Home › ENGINE ยท 1KD-FTV › ENGINE CONTROL SYSTEM › DIESEL THROTTLE BODY

DIESEL THROTTLE BODY > REMOVAL

for Preparation Click here



1. REMOVE NO. 1 ENGINE COVER SUB-ASSEMBLY


    A111785
  1. Remove the 3 bolts, 2 nuts and engine cover.



2. REMOVE CHARGE AIR COOLER ASSEMBLY WITH INTAKE AIR CONNECTOR


    A111786
  1. Disconnect the IAT sensor connector.

  1. Disconnect the manifold absolute diesel pressure sensor connector.

  1. Disconnect the vacuum hose from the manifold absolute pressure sensor.



    A111787
  1. Loosen the 2 clamps.



    A112764
  1. Remove the 4 bolts and CAC.



3. REMOVE DIESEL THROTTLE BODY ASSEMBLY


    A111790
  1. Disconnect the throttle position sensor connector.

  1. Disconnect the throttle control motor connector.



    A111832
  1. Remove the 2 bolts, 2 nuts, throttle body and gasket.