Home › ENGINE ยท 2KD-FTV › ENGINE CONTROL SYSTEM › ACCELERATOR PEDAL

ACCELERATOR PEDAL > REMOVAL

for Preparation Click here



1. REMOVE ACCELERATOR PEDAL SENSOR ASSEMBLY

NOTICE:
  1. Avoid excessive force to the accelerator pedal sensor.
  2. Do not disassemble the accelerator pedal sensor assembly.
  3. This accelerator pedal does not require lubrication.
    Do not apply oil or lubricant to the accelerator pedal sensor assembly.
    If applied, the accelerator pedal sensor assembly must be replaced.



    A099092E02
  1. Disconnect the accelerator pedal sensor connector.

  1. Remove the 2 bolts and accelerator pedal sensor.