Home
›
ENGINE · 2TR-FE
›
EMISSION CONTROL
›
HEATED OXYGEN SENSOR (for Unleaded Gasoline Specification Vehicle)
HEATED OXYGEN SENSOR (for Unleaded Gasoline Specification Vehicle) > INSPECTION
for Preparation
Click here
1. INSPECT HEATED OXYGEN SENSOR (for Bank 1 Sensor 1)
Measure the resistance between terminals 1 (HT1A) and 2 (+B) of the sensor.
Standard resistance:
5 to 10 Ω at 20°C (68°F)
If the result is not as specified, replace the heated oxygen sensor.