Home › ENGINE ยท 2KD-FTV › INTAKE › TURBOCHARGER

TURBOCHARGER > INSPECTION

for Preparation Click here



1. VISUALLY CHECK TURBOCHARGER SUB-ASSEMBLY


    A220776E01
  1. Check for deformation and cracks in the turbine wheel on the exhaust side.
    Text in Illustration 
    *1
    Turbine Wheel
    If the turbine wheel is cracked or deformed, replace the turbocharger sub-assembly.



2. INSPECT AXIAL PLAY OF TURBINE SHAFT


    A254005
  1. Using a dial indicator, insert the needle of the dial indicator into the exhaust side of the turbine shaft.

    NOTICE:
    Turbocharger sub-assembly and dial indicators are surely fixed when performing measurement.

  1. Move the turbine shaft in an axial direction and measure the axial play of the turbine shaft.

    Maximum axial play:
    0.11 mm (0.00433 in.)

    If the axial play is more than the maximum, replace the turbocharger sub-assembly.



3. CHECK TURBINE SHAFT ROTATION


    A229649
  1. Rotate the turbine wheel on the exhaust side with your finger and check that it rotates smoothly.

    HINT:
    Even if it takes effort a little to rotate the turbine wheel, this is not a problem.

    If the turbine wheel does not rotate smoothly, replace the turbocharger sub-assembly.