Home › ENGINE ยท 1KD-FTV › COOLING › THERMOSTAT

THERMOSTAT > INSPECTION

for Preparation Click here



1. INSPECT THERMOSTAT


G035894E01

HINT:
The valve opening temperature is inscribed on the thermostat.



    G037486E01
  1. Immerse the thermostat in water and then gradually heat the water.

  1. Check the valve opening temperature.

    Standard valve opening temperature:
    80 to 84°C (176 to 183°F)

    1. If the valve opening temperature is not within the specified range, replace the thermostat.



    S005683E01
  1. Check the valve lift.

    Standard valve lift:
    10 mm (0.39 in.) or more at 95°C (203°F)

    1. If the valve lift is not as specified, replace the thermostat.

  1. Check that the valve is fully closed when the thermostat is below 40°C (104°F).

    1. If not fully closed, replace the thermostat.