THERMOSTAT > REMOVAL |
| 1. REMOVE NO. 1 ENGINE UNDER COVER |
| 2. DRAIN ENGINE COOLANT |
Loosen the radiator drain cock plug.
![]() |
Drain the coolant by removing the radiator reservoir cap and, using a wrench, remove the vent plug.
Loosen the cylinder block drain cock plug.

| *1 | Radiator Reservoir | *2 | Radiator Reservoir Cap |
| *3 | Vent Plug | *4 | Cylinder Block Drain Cock Plug |
| *5 | Radiator Drain Cock Plug | - | - |
| 3. REMOVE INTERCOOLER ASSEMBLY WITH INTAKE AIR CONNECTOR |
| 4. REMOVE AIR CLEANER ASSEMBLY |
Disconnect the mass air flow meter connector.
Loosen the hose clamp.
Remove the 2 bolts and air cleaner.
| 5. REMOVE VENTILATION PIPE |
![]() |
Remove the bolt and disconnect the 2 ventilation hoses and ventilation pipe.
| 6. REMOVE COMPRESSOR INLET ELBOW |
![]() |
Disconnect the 2 connectors from the turbocharger.
Detach the wire harness clamp.
Remove the 2 nuts, compressor inlet elbow and gasket.
| 7. DISCONNECT RADIATOR HOSE OUTLET |
Disconnect the radiator hose outlet from the water inlet.
| 8. REMOVE WATER INLET |
![]() |
Disconnect the wire harness clamp.
Remove the 3 bolts and water inlet.
Remove the bolt and wire harness clamp bracket from the water inlet.
| 9. REMOVE THERMOSTAT |
Remove the thermostat from the cylinder block.
Remove the gasket from the thermostat.