RADIATOR > REMOVAL |
| 1. REMOVE NO. 1 ENGINE UNDER COVER |
| 2. DRAIN ENGINE COOLANT |
Loosen the radiator drain cock plug.
![]() |
Drain the coolant by removing the radiator reservoir cap and, using a wrench, remove the vent plug.
Loosen the cylinder block drain cock plug.

| *1 | Radiator Reservoir | *2 | Radiator Reservoir Cap |
| *3 | Vent Plug | *4 | Cylinder Block Drain Cock Plug |
| *5 | Radiator Drain Cock Plug | - | - |
| 3. REMOVE RADIATOR GRILLE |
![]() |
Remove the 2 clips and 2 screws.
![]() |
Put protective tape around the radiator grille.
| *1 | Protective Tape |
Detach the 6 claws and remove the radiator grille.
| 4. REMOVE RADIATOR SIDE DEFLECTOR LH |
Using a clip remover, remove the 2 clips.
Detach the claw and remove the radiator side deflector LH.
| 5. REMOVE RADIATOR SIDE DEFLECTOR RH |
Using a clip remover, remove the 2 clips.
Detach the claw and remove the radiator side deflector RH.
| 6. DISCONNECT RADIATOR HOSE INLET |
Disconnect the radiator hose inlet from the radiator.
| 7. DISCONNECT RADIATOR HOSE OUTLET |
Disconnect the radiator hose outlet from the radiator.
| 8. REMOVE FAN SHROUD |
![]() |
Remove the 3 bolts and oil reservoir.
![]() |
Disconnect the No. 1 and No. 2 water by-pass hoses from the radiator.
Remove the 2 bolts and radiator reservoir.
Loosen the 4 nuts holding the fluid coupling with fan.
Remove the fan and generator V belt (Click here).
Remove the 2 bolts holding the fan shroud.
Remove the 4 nuts of the fluid coupling with fan, and then remove the fan shroud together with the fluid coupling with fan.
Remove the fan pulley from the water pump.
| 9. REMOVE RADIATOR ASSEMBLY |
![]() |
Remove the 4 bolts and radiator.