Home › ENGINE ยท 2TR-FE › COOLING › THERMOSTAT

THERMOSTAT > REMOVAL

for Preparation Click here



1. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL

CAUTION:
Wait at least 90 seconds after disconnecting the cable from the negative (-) battery terminal to prevent airbag activation.



2. REMOVE NO. 1 ENGINE UNDER COVER
  1. Remove the 4 bolts and cover.



3. DRAIN ENGINE COOLANT
  1. Remove the radiator cap.



  1. Loosen the cylinder block drain cock plug and radiator drain cock plug, and then drain the coolant.

    HINT:
    Collect the coolant in a container and dispose of it according to the regulations in your area.



    A112146E01



4. DISCONNECT RADIATOR HOSE OUTLET


5. REMOVE WATER INLET


A099676E01
  1. Disconnect the connector.



    A120284E01
  1. Remove the 2 nuts, bolt and inlet.



6. REMOVE THERMOSTAT