WATER PUMP > REMOVAL |
| 1. DISCONNECT NEGATIVE BATTERY TERMINAL |
| 2. REMOVE NO. 1 ENGINE UNDER COVER |
Remove the 4 bolts and under cover.
| 3. DRAIN ENGINE COOLANT |
Remove the radiator cap.

Loosen the 2 cylinder block drain cock plugs and radiator drain cock plug, and then drain the coolant.
| 4. REMOVE V-BANK COVER |
![]() |
Remove the 2 nuts and V-bank cover.
| 5. DISCONNECT RADIATOR HOSE INLET |
Disconnect the hose inlet from the radiator tank upper.
| 6. DISCONNECT RADIATOR HOSE OUTLET |
Disconnect the hose outlet from the radiator tank lower.
| 7. REMOVE FAN SHROUD |
![]() |
Disconnect the radiator reservoir hose from the radiator tank upper.
Loosen the 4 nuts holding the fluid coupling fan.
Remove the drive belt .
Remove the 2 bolts holding the fan shroud.
Remove the 4 nuts of the fluid coupling fan, and then remove the shroud together with the coupling fan.
Remove the fan pulley from the water pump.
| 8. DISCONNECT NO. 2 VENTILATION HOSE |
![]() |
| 9. REMOVE AIR CLEANER ASSEMBLY |
![]() |
Disconnect the vacuum hose.
Disconnect the MAF meter connector.
Remove the 2 wire harness clamps.
![]() |
Loosen the 2 hose clamps.
Remove the 2 bolts and air cleaner.
| 10. REMOVE WATER INLET HOUSING |
![]() |
Disconnect the 2 radiator hoses from the housing.
![]() |
Disconnect the 3 water by-pass hoses.
![]() |
Remove the 5 bolts and water inlet.
Remove the O-ring from the water outlet pipe.
Remove the O-ring from the water pump.
| 11. REMOVE NO. 2 IDLER PULLEY |
w/ Idler Pulley Cover Plate:
![]() |
Remove the bolt, No. 2 idler pulley cover plate, idler pulley and idler pulley cover plate.
w/o Idler Pulley Cover Plate:
![]() |
Remove the bolt, No. 2 idler pulley cover plate and idler pulley.
![]() |
for Integrated Type:
Remove the 2 bolts and 2 No. 2 idler pulleys.
| 12. REMOVE GENERATOR ASSEMBLY |
![]() |
Disconnect the terminal cap.
Remove the 2 bolts, nut and generator wire.
Disconnect the generator connector.
Remove the 2 bolts and generator.
| 13. REMOVE V-RIBBED BELT TENSIONER ASSEMBLY |
![]() |
Remove the 5 bolts and V-ribbed belt tensioner.
| 14. REMOVE WATER PUMP ASSEMBLY |
![]() |
Remove the 17 bolts, water pump and gasket.