Home › ENGINE ยท 2KD-FTV › ENGINE MECHANICAL › CYLINDER HEAD

CYLINDER HEAD > DISASSEMBLY

for Preparation Click here



1. REMOVE INTAKE VALVE


    A060282E01
  1. Using SST, compress the compression spring and remove the 2 valve spring retainer locks.

    SST
    09202-70020  
    09202-00020  

  1. Remove the spring retainer, compression spring, valve and spring seat.

    HINT:
    Arrange the valves, compression springs, spring seats and spring retainers in the correct order.



2. REMOVE EXHAUST VALVE


    A060276E01
  1. Using SST, compress the compression spring and remove the 2 valve spring retainer locks.

    SST
    09202-70020  
    09202-00020  

  1. Remove the spring retainer, compression spring, valve and spring seat.

    HINT:
    Arrange the valves, compression springs, spring seats and spring retainers in the correct order.



3. REMOVE INTAKE VALVE STEM OIL SEAL


    A058955E01
  1. Using needle-nose pliers, remove the oil seal.



4. REMOVE EXHAUST VALVE STEM OIL SEAL
  1. Using needle-nose pliers, remove the oil seal.



5. REMOVE SEMICIRCULAR PLUG


6. REMOVE NO. 1 STRAIGHT SCREW PLUG

HINT:
If a No. 1 straight screw plug is corroded, replace it.

  1. Using a 6 mm hexagon wrench, remove the No. 1 straight screw plugs.



7. REMOVE STUD BOLT

HINT:
If a stud bolt is deformed or its threads are damaged, replace it.