CYLINDER HEAD > DISASSEMBLY |
| 1. REMOVE VALVE LIFTER |
Remove the valve lifters.
| 2. REMOVE INTAKE VALVE |
![]() |
Using SST, compress the compression spring and remove the 2 valve spring retainer locks.
Remove the spring retainer, compression spring, valve and spring seat.
| 3. REMOVE EXHAUST VALVE |
![]() |
Using SST, compress the compression spring and remove the 2 valve spring retainer locks.
Remove the spring retainer, compression spring, valve and spring seat.
| 4. REMOVE VALVE STEM OIL SEAL |
![]() |
Using needle-nose pliers, remove the oil seal.
| 5. REMOVE SEMICIRCULAR PLUG |
| 6. REMOVE STRAIGHT SCREW PLUG |
| 7. REMOVE RING PIN |
| 8. REMOVE STUD BOLT |