Home › ENGINE · 2KD-FTV › FUEL › FUEL SUPPLY PUMP

FUEL SUPPLY PUMP > INSPECTION

for Preparation Click here



1. INSPECT FUEL SUPPLY PUMP ASSEMBLY


    A191340E08
  1. Inspect the suction control valve.
    Text in Illustration 
    *1
    Suction Control Valve

    1. Measure the resistance according to the value(s) in the table below.

      Standard Resistance:
      Tester Connection
      Condition
      Specified Condition
      1 - 2
      20°C (68°F)
      1.9 to 2.3 Ω

      If the result is not specified, replace the fuel supply pump assembly.



    A231754E03
  1. Inspect the fuel temperature sensor.
    Text in Illustration 
    *1
    Fuel Temperature Sensor

    1. Measure the resistance according to the value(s) in the table below.

      Standard Resistance:
      Tester Connection
      Condition
      Specified Condition
      1 - 2
      20°C (68°F)
      2.32 to 2.59 kΩ

      If the result is not specified, replace the fuel supply pump assembly.