EMISSION CONTROL SYSTEM > ON-VEHICLE INSPECTION |
| 1. CHECK FUEL CUT RPM |
Increase the engine speed to at least 3,500 rpm.
Use a sound scope to check for injector operation noise.
Check that when the throttle lever is released, injector operation noise stops momentarily and then resumes.
| 2. CHECK FOR LEAKS |
![]() |
Visually check that the hoses, connections and gaskets have no cracks, leaks or damage.
If the result is not as specified, replace parts as necessary.
| 3. CHECK HOSES AND CONNECTORS |
Visually check for loose connections, sharp bends or damage.
| 4. CHECK FUEL TANK ASSEMBLY |
Visually check for deformation, cracks or fuel leakage.