Home › BODY ELECTRICAL › LIGHTING › HAZARD WARNING SWITCH

HAZARD WARNING SWITCH > INSTALLATION

for Preparation Click here



1. INSTALL HAZARD WARNING SIGNAL SWITCH ASSEMBLY


    B113570E01
  1. Attach the 2 claws to install the switch.



2. INSTALL FRE/REC CONTROL KNOB


E225819
  1. Install the No. 2 heater control knob as shown in the illustration.



3. INSTALL HEATER CONTROL KNOB


E225818
  1. Install the heater control knob as shown in the illustration.



4. INSTALL INSTRUMENT CLUSTER FINISH PANEL ASSEMBLY CENTER
  1. for Manual Air Conditioning System:

    1. Connect the connectors.

    2. Attach the 4 claws to connect the air conditioner control.

    3. Attach the 10 claws and 4 clips to install the center instrument cluster finish panel.

  1. for Automatic Air Conditioning System:

    1. Connect the connectors.

    2. Attach the 8 claws and 4 clips to install the center instrument cluster finish panel.



5. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL