HAZARD WARNING SWITCH > INSTALLATION |
| 1. INSTALL HAZARD WARNING SIGNAL SWITCH ASSEMBLY |
![]() |
Attach the 2 claws to install the switch.
| 2. INSTALL FRE/REC CONTROL KNOB |
![]() |
Install the No. 2 heater control knob as shown in the illustration.
| 3. INSTALL HEATER CONTROL KNOB |
![]() |
Install the heater control knob as shown in the illustration.
| 4. INSTALL INSTRUMENT CLUSTER FINISH PANEL ASSEMBLY CENTER |
for Manual Air Conditioning System:
Connect the connectors.
Attach the 4 claws to connect the air conditioner control.
Attach the 10 claws and 4 clips to install the center instrument cluster finish panel.
for Automatic Air Conditioning System:
Connect the connectors.
Attach the 8 claws and 4 clips to install the center instrument cluster finish panel.
| 5. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL |